73
Configuring the BIOS 5
Power Menu
The power management settings are controlled by the operating system. This menu only has one func-
tion as follows:
Item Specific Help
LCD auto power saving [Enabled]
Start Battery Refreshing
By slowing down CPU
speed when AC adapter
not in use to conserve
battery power
LCD Auto Power Saving [Enabled]
Enabling this item will decrease the LCD brightness when the AC power is not connected in order to
conserve battery power. The configuration options are: [Disabled] [Enabled].
Start Battery Refreshing
This function will start a software program to remove memory effects in the battery and recalibrate the
battery gauge. Even though this Notebook PC uses a Lithium-Ion battery which is not prone to memory
effects, memory effects will still occur at the end of the battery’s life cycle. Remember that all recharge-
able batteries only have a definite number of charge and discharge cycles depending on environment
and quality of the battery pack. Follow the instructions shown on the screen.
To Next Page
Loading...
