Asus M2V - Power BIOS Menu Configuration

ASUS M2V 4-25
4.5 Power menu
The Power menu items allow you to change the settings for the Advanced
Power Management (APM) feature. Select an item then press <Enter> to
display the conguration options.
Suspend Mode [Auto]
Repost Video on S3 Resume [No]
ACPI 2.0 Support [ACPI v1.0]
ACPI APIC Support [Enabled]
APM Conguration
Hardware Monitor
Select the ACPI state
used for System
Suspend.
4.5.1 Suspend Mode [Auto]
Allows you to select the ACPI state to be used for system suspend.
Conguration options: [S1 (POS) Only] [S3 Only] [Auto]
4.5.2 Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS POST on S3/STR resume.
Conguration options: [No] [Yes]
4.5.3 ACPI 2.0 Support [ACPI v1.0]
Allows you to add more tables for ACPI 1.0 specications. Select [ACPI
v2.0, if you install Vista operating system.
Conguration options: [ACPI v1.0] [ACPI v2.0] [ACPI v3.0]
4.5.4 ACPI APIC Support [Enabled]
Enables or disables the ACPI support in the ASIC. When set to Enabled,
the ACPI APIC table pointer is included in the RSDT pointer list.
Conguration options: [Disabled] [Enabled]