4-34
Chapter 4: BIOS setup
4.5.6 Hardware Monitor
CPU Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures. Select Ignored if you do not wish to display the detected
temperatures.
CPU / Chassis / Power Fan Speed [xxxxRPM] or [Ignored]
The onboard hardware monitor automatically detects and displays the CPU
/ Chassis / Power fan speed in rotations per minute (RPM). If the fan is not
connected to the motherboard, the eld shows N/A. Select Ignored if you do not
wish to display the detected speed.
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators. Select [Ignored] if you do not want to detect this
item.
Smart Q-Fan Function [Disabled]
Allows you to enable or disable the ASUS Q-Fan feature that smartly adjusts the
fan speeds for more efcient system operation.
Conguration options: [Disabled] [Enabled]
The following items appear only if you set the Smart Q-Fan Function to
[Enabled].
Smart Q-Fan Prole [Optimal]
Allows you to set the appropriate performance level of the CPU Q-Fan. When
set to [Optimal], the CPU fan automatically adjusts depending on the CPU
temperature. Set this item to [Silent] to minimize fan speed for quiet CPU fan
operation, or [Performance] to achieve maximum CPU fan speed.
Conguration options: [Performance] [Optimal] [Silent]
BIOS SETUP UTILITY
Power
Hardware Monitor
CPU Temperature [37ºC/98.5ºF]
MB Temperature [39ºC/102ºF]
CPU Fan Speed [3292RPM]
Chassis Fan Speed [N/A]
Power Fan Speed [N/A]
VCORE Voltage [ 1.344V]
3.3V Voltage [ 3.280V]
5V Voltage [ 4.966V]
12V Voltage [11.916V]
Smart Q-FAN Function [Disabled]
CPU Temperature
To Next Page
Loading...
Need help?
General
