Asus P9D-E/4L User Manual

4-40
Chapter 4: BIOS setup
Discard Changes & Reset
This option allows you to reset without saving your changes. When you select this
option or if you press <ENTER>, a confirmation window appears. Select Yes to
discard changes and reset.
Restore Defaults
This option allows you restore or load the default values for all the setup options.
When you select this option or if you press <ENTER>, a confirmation window
appears. Select
Yes
to apply the default values or press <Esc> to exit.
Launch EFI Shell from lesystem device
This option allows you to launch the EFI Shell application (shellx64.efi) from one of
the available filesystem devices. Select Yes to proceed, or No to cancel, and then
press <Enter>.

Asus P9D-E/4L Specifications

General

USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1, 2
Maximum UDIMM memory	32 GB
Supported DIMM module capacities	2GB, 4GB, 8GB
TPM connector	Yes
Supported memory types	DDR3-SDRAM
Supported memory clock speeds	1333, 1600 MHz
PCI Express x8 (Gen 2.x) slots	0
RAID levels	0, 1, 5, 10
Supported storage drive interfaces	SATA II, SATA III
Wi-Fi	No
LAN controller	Intel® I210-AT
Ethernet interface type	Gigabit Ethernet
On-board graphics card model	Aspeed AST2300
On-board graphics card memory	32 MB
Cables included	SATA, USB-SATA
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	20 - 90 %
Processor socket	LGA 1150 (Socket H3)
Intel Xeon series	E3-1200
Processor manufacturer	Intel
Motherboard chipset	Intel® C224
Motherboard form factor	ATX
Harmonized System (HS) code	84733020

Weight and Dimensions

Depth	243.84 mm
Width	304.8 mm