Asus ROG Swift PG27V - Monitor Introduction; Front View

1-2 Chapter 1: Product introduction
1.3 Monitor introduction
1.3.1 Front view
5
1
2
3
4
5
1. ( 5-way) button:
Turns on the OSD menu. Enacts the selected OSD menu item.•
Increases/Decreasesvaluesormovesyourselectionup/down/left/right.•
Turns on the OSD menu when the monitor enters standby mode or •
displays the “NO SIGNAL“ message.
2. button
Exits the OSD menu item.•
Toggles the Key Lock function between on and off with a long press for 5 •
seconds.
Turns on the OSD menu when the monitor enters standby mode or •
displays the “NO SIGNAL“ message.
3. button:
GamePlus hotkey. Move the •
( )buttonup/downtoselectand
press ( ) to confirm the function needed.
Turns on the OSD menu when the monitor enters standby mode or •
displays the “NO SIGNAL“ message.
4. button
GameVisual hotkey. This function contains 6 sub-functions you can select •
for your preference.
Turns on the OSD menu when the monitor enters standby mode or •
displays the “NO SIGNAL“ message.