Asus ROG Swift PG27V User Manual

2-5ASUS PG27V Series LCD Monitor
2.5 Connecting the cables
Connect the cables as the following instructions:
To connect the power cord: •
Connect the power adapter securely to the monitor’s DC IN input.a.
Connect one end of the power cord to the power adapter and the other b.
end to a power outlet.
To connect the DisplayPort/HDMI cable: •
PlugoneendoftheDisplayPort/HDMIcabletothemonitor’sDisplayPort/a.
HDMI port.
ConnecttheotherendoftheDisplayPort/HDMIcabletoyourcomputer'sb.
DisplayPort/HDMIport.
To use the earphone: •
connect the end with plug type to the monitor’s
earphone jack when an HDMI or DisplayPort signal is fed.
To use the USB 3.0 ports:•
Take the supplied USB 3.0 cable, and plug
the smaller end (type B) of the USB upstream cable to the monitor’s USB
upstream port, and the larger end (type A) to your computer’s USB 3.0 port.
MakesureyourcomputerisinstalledwiththelastestWindows7/Windows8.1/
Windows 10 operating system. That will enable the USB ports on the monitor
to work.
2.6 Turning on the monitor
Press the power button. See page 1-3 for the location of the power button. The
power indicator lights up in white to show that the monitor is ON.

Asus ROG Swift PG27V Specifications

General

Brand	Asus
Model	ROG Swift PG27V
Category	Monitor
Language	English