3-8
Chapter 3: OSD (On-Screen Display) menu
• Sound: Sets the sound related settings from this menu.
• Volume (Earphone Out): The adjusting range is from 0 to 100.
• Mute: Toggles the monitor sound between on and off.
• Source: Decides the monitor sound comes from which source.
• USB Setup: Turns On/Off the USB Setup function during standby mode.
This function is not available (set as On During Standby) when Aura Sync is
enabled.
• Power Indicator: Turns the power LED indicator on/off.
• Power Key Lock: Enables or disables the power key.
• Key Lock: To disable all function keys. Press OK button for over 5
seconds to cancel the key lock function.
• Power Setting:
• Standard Mode: Standard mode setting may result in higher
power consumption.
• Power Saving Mode: Power saving mode may cause limited
luminance performance.
Certain functions that consumes power will be disabled when Power Saving
Mode is selected. If you wish to enable the functions, choose Standard Mode.
Please turn off HDR function before activating the Power Saving Mode.
• OSD Setup:
• Adjusts the OSD position horizontally.
• Adjusts the OSD timeout from 10 to 120 seconds.
• Adjusts the OSD background from opaque to transparent.
• Enables or disables the DDC/CI function.
• DisplayPort Stream: Compatibility with graphic card. Select DisplayPort
1.2, DisplayPort 1.4, or DisplayPort 2.1 by by graphic card supported
DP version.
• DSC Support: DisplayPort Display Stream Compression.
• HDMI CEC: Allows power on/off control of the console device or setup
box, such as Apple TV, Sony PlayStation, Xbox Series X/S, Nitendo
Switch through the monitor. The default setting is OFF.
If the monitor is turned on, the CEC source device will automatically power
on, and vice versa. If the CEC source device is turned on, the monitor will
automatically power on.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
