EasyManua.ls Logo

Asus RT-N12 - Restoring System to Default Settings

Asus RT-N12
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
RT-N12 Chapter 6: Troubleshooting
Problem Action
How to restore the system to
its default settings?
Press the Restore button at the rear panel
of the wireless router for more than ve
seconds.
Refer to the section Restoring/Saving/
Uploading settings in Chapter 4 of this
user manual.
The following are the factory default settings:
User Name: admin
Password: admin
Enable DHCP: Yes (if WAN cable is plugged in)
IP address: 192.168.1.1
Domain Name: (Blank)
Subnet Mask: 255.255.255.0
DNS Server 1: 192.168.1.1
DNS Server 2: (Blank)
SSID: ASUS
I cannot use 192.168.1.1 to
enter the web GUI.
Check the router’s operation mode.
In the Router mode, the default IP address
is 192.168.1.1.
In the Repeater / AP mode, use Device
Discovery to nd the router’s IP address.

Other manuals for Asus RT-N12

Related product manuals