2
Table of Contents
1. Installation Safety Warnings! 3
2. Kit Contents 4
3. Tools Required 4
4. Setup Requirements 5
The Opener: 5
Unsuitable Door Types 5
Sideroom 5
5. Door Preparation 6
Prepare the Door: 6
6. Fit the Weight Bar 6
If the door has a handle: 6
If the door does not have a handle: 6
7. Pinning the Door 7
8. Proping the Door 7
9. Mounting the Opener 8
Raising the Door: 8
Mounting the Opener: 8
10. Setting the Travel Limits 9
Initial Preparation: 9
Set the Limit Positions: 9
Resetting the Door Limit Positions 9
Setting the PET Mode position 9
Reset all Factory Defaults 9
11. Safety Testing 10
Test the Close Cycle 10
Testing the Open Cycle 10
Test the Manual Door Operation 10
Adjusting Safety Obstruction Force 10
To Increase Force Pressure 10
To Decrease Force Pressure 10
To Recall Factory Set Force 10
To Recalculate Force Margins 10
12. Accessories 11
Auxiliary Output 11
Keyswitch Connection 11
Remote Aerial 11
13. Auto-Close 11
Safety Beams 11
Auto Close Option 11
14. Coding a Transmitter 12
Storing the Transmitter Code 12
Coding a Transmitter to Enable Vacation Mode 12
Coding a Transmitter to enable AUX Output 12
Setting the Transmitter to Operate PET Mode 12
Coding a Transmitter to the Courtesy Light 12
Easy Access Transmitter (EAT) Coding 13
Remotely Coding Transmitters 13
Erasing a Stored Transmitter Code 13
Erasing All Transmitter Codes 13
Installation Instructions
Home Owner Instructions
15. Home Owner Safety Warnings! 14
16. Opener Safety & Security 15
Your Door CAN NOT be used when: 15
Your Door CAN be used when: 15
To Disengage the Opener: 15
To Re-Engage the Opener: 15
17. Operating your Opener 15
18. User Operating Controls 16
19. Door Status Indicators 16
20. Specifications 17
21. Troubleshooting 18
22. Maintenance 20
23. Battery Replacement 20
24. Battery Disposal 20
25. Service Schedule 21
26. Warranty 22
27. Optional Accessories 23
To Next Page
Loading...
