EN 32
Display
You can set the following from this menu:
• Brightness (low, mid, high)
• Oven lighting (auto switch off after 1 min. / manual)
• Night mode (start and end time for lower display brightness: first
display set start timer, second display set end time)
• Stand-by (auto switch off / manually switch off)
Changing to manually switch off will increase energy consumption.
If the oven is switched off manually (or when an interruption of the
power supply occurs) this function will be reset (the display will
automatically switch off).
Cooking
You can set the following from this menu:
• Microwave (default 750 W for 1 minute)
• Default program intensity (low / medium / high)
• Steam (Descaling / Water hardness)
• Preheat settings (set preheat default on or off)
System
You can set the following from this menu:
• Appliance information (request appliance information)
• Factory settings (back to factory settings)
Plus menu
Depending on the function, there is a possibility to choose extra
functionality (after you have chosen a main function and settings in the
‘Function settings mode’) by touching the ‘plus key’.
• A small icon next to the curent time will give an indication about the
activated plus menu functions. The colour of the icon will indicate if
it is active (white) or inactive (grey).
• To exit the plus menu, touch the ‘stop key’ or ‘plus key’; the display
will show the previous screen again.
• To cancel an extra functionality, select ‘cancel’ (icon with a red
stripe).
USE
To Next Page
Loading...
Need help?
General
