EasyManuals Logo

Atag CSX46 D Series User Manual

Atag CSX46 D Series
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
EN 41
Replacing the oven light bulb
The lamp in this household appliance is only suitable for
illumination of this appliance. The lamp is not suitable for
household room illumination.
The lamp is a consumer item and therefore not covered by warranty.
Replace the defective lamp with a lamp of the same type.
Disconnect the appliance from the power supply by removing the
plug from the socket or by switching off the circuit breaker in the
fuse box.
Please note: the light bulb can be very hot! Use protection to
remove the bulb.
1. Unscrew the cover panel’s four screws. Remove the cover panel
and glass.
2. Remove the faulty halogen lamp and replace it with a new one.
3. Replace the cover panel and the glass.
Attention: Do not allow the sealing ring to be detached from the
cover panel.
CLEANING

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atag CSX46 D Series and is the answer not in the manual?

Atag CSX46 D Series Specifications

General IconGeneral
BrandAtag
ModelCSX46 D Series
CategoryOven
LanguageEnglish

Related product manuals