EasyManua.ls Logo

Atag CX4771B - Replacing the Oven Bulb

Atag CX4771B
188 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Replacing the bulb
The bulb is a consumable and therefore not covered by warranty. Before replacing the bulb, remove
all accessories from the oven.
The oven is fitted with a halogen lamp.
This product contains a light source of energy efficiency class (G).
Halogen lamp: G9, 230 V, 25 W
1 Undo the four screws. Remove the cover
and the glass.
2 Remove the halogen light bulb and replace
it with a new one.
INFORMATION!
Use protection to avoid burns.
There is a gasket on the cover which should
not be removed. The gasket should fit onto
the oven cavity wall.
WARNING!
Only replace the light bulb when the appliance is disconnected from power supply.
Firmly re-tighten the screws on the cover using a screwdriver; otherwise, sparks may
appear.
42
Cleaning and maintenance

Table of Contents

Related product manuals