GB 10
Switching on
• Place a pan on a cooking zone.
• Touch the On/Off button.
You will hear a short beep and all displays show “0.”. If no further
action is taken, the hob automatically switches off after 10 seconds.
Setting the power
• Tap the desired zone selection button with your fingertip.
The level indicator statically displays a small dot behind the “0”, this
zone is now active.
• Use the + or the - button of the desired cooking zone to choose
the correct setting. The hob will automatically start in the chosen
setting.
▷ Tapping the + button for the first time displays setting ‘5.’.
▷ Tapping the - button for the first time displays setting ‘9.’.
Switching off
Switching off one cooking zone
The cooking zone is switched on and active. The display shows a power
setting between 1 and 9 with a static dot.
• Touch and hold the - and the + buttons simultaneously for one
second of the cooking zone you wish to switch off.
Or:
• Select setting “0.” by touching the - button.
Switching off all of the cooking zones at the same time
The hob is in stand-by mode, or one or more of the cooking zones are
switched on.
• Briefly touch the On/Off button to switch off all of the cooking
zones at the same time.
You will hear a single beep. No lights are illuminated except for
(possibly) the residual heat indicator “H”.
The hob is now switched off.
Attention
• The hob saves the latest settings with regard to the extra zone
element. When switching the hob on again, the hob will resume
using the saved settings.
OPERATION
To Next Page
Loading...
Need help?
General
