GB 12
OPERATION
(Child) lock
You can secure the hob with the (child) lock. With this setting, the
hob cannot be switched on and the cooking zone settings cannot be
changed.
The (child) lock button gives you access to the following two functions:
(Standard) lock mode Child lock mode
The (standard) lock mode
prevents settings from being
accidentally changed.
The child lock mode prevents
the hob from being accidentally
switched on.
All of the set cooking
processes remain active.
All of the cooking zones and the
kitchen timers/egg timers must be
set to “0”.
Switch the hob to (standard) lock mode
One or more cooking zones are active.
• Touch and hold the (child) lock button.
Attention! All of the set cooking processes remain active.
The red light to the right of the (child) lock button is constantly
illuminated. All of the buttons are inactive, except for the (child) lock
button and the On/Off button.
• Touch and hold the (child) lock button again to switch off the lock
mode and unlock the control panel.
Switching on the child lock
The hob is in stand-by mode. The display for each cooking zone shows
“0.”.
• Touch and hold the (child) lock bu
tton to switch on the (child) lock.
The red light to the right of the (child) lock button is constantly
illuminated.
If no buttons are touched within 10 seconds, the cooking zone will
automatically switch off. The child lock remains active. You can also
switch off the hob manually:
• Touch the (child) lock button again within 10 seconds to switch off
the child lock and unlock the control panel.
• You must wait 10 seconds before switching the hob on again with
the On/Off button in order to switch off the child lock.
To Next Page
Loading...
Need help?
General
