EasyManuals Logo

Atag i28C Installation & Servicing Instructions

Atag i28C
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
Installation & Servicing instructions ATAG iC-Range
64
14.3.1 Setting the weather compensation
To set up the weather compensation, follow the steps below.
1 Turn the selector wheel to highlight the Parameters Zone you want to set.
In this case Zone 1 Parameters.
Press OK.
2 Turn the selector wheel to highlight 4.7 Zone regulation Parameters.
Press OK.
3 Turn the selector wheel to highlight 4.7.0 Heating Type.
Press OK.
Make a choise between: 0 Underfoor or
1 Radiator or
or
3 Radiators (main) + underfoor or
4 Convector or
5 Air heating
Press BACK to the 4.7 Zone regulation Parameters screen.
4 Turn the selector wheel to highlight 4.7.2 Building Isolation Level.
Press OK.
Make a choise between: 0 Poor or
1 Average or
2 Good
Press BACK to the 4.7 Zone regulation Parameters screen.
5 Turn the selector wheel to highlight 4.7.3 Building Size.
Press OK.
Make a choise between: 0 Small or
1 Average or
2 Large
6 Turn the selector wheel to highlight .
Press OK.
7 Turn the selector wheel to set the Room Inuence 0 OFF.

Table of Contents

Other manuals for Atag i28C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atag i28C and is the answer not in the manual?

Atag i28C Specifications

General IconGeneral
BrandAtag
Modeli28C
CategoryBoiler
LanguageEnglish

Related product manuals