EN 26
• Switching the ZeroZone on/off: Press the G key and hold it for 5 seconds. When activated,
the G key will be lit up.
• Setting the temperature in the ZeroZone: press the I keys to set the temperature between
-2 °C and +3 °C.
• ZeroZone may operate even when the refrigerator compartment is switched off.
• After switching from freezer to ZeroZone function, it may be necessary to wait a few hours
for the temperature to increase to the set value. The display J will flash during this time.
• The temperatures are approximate and they depend on the temperature settings in the
refrigerator compartment, ambient temperature, frequency of door opening, and amount
of food inserted. Higher temperatures in the ZeroZone compartment lead to higher
temperatures in the refrigerator compartment, and vice versa. Adjust the setting to the
operating conditions.
• If the bottom compartment functions as a ZeroZone, the temperatures in the refrigerator
compartment can only be set in the range from +4 °C to +9 °C. We recommend such use
only when the ambient temperature is between +16 °C and +32 °C. At higher or lower
temperatures, it is not possible to guarantee adequately low temperatures in the appliance.
APPLIANCE DESCRIPTION
Controlling the ZeroZone compartment
• The entire freezer compartment can be turned into a ZeroZone
compartment. The temperature in this compartment is around 0 °C.
• The ZeroZone compartment allows storing a wide variety of fresh food
to keep up to three times longer than in a conventional refrigerator. The
food stays fresh longer, retaining the flavour and nutrients.
• Therefore, do not store food that is sensitive to low temperature
in this compartment as such food may freeze. Before switching to
ZeroZone function, empty the freezer compartment to prevent the
frozen food from defrosting and perishing.
To Next Page
Loading...
