EN 11
USING YOUR APPLIANCE
Using the “minute minder” function
Your oven’s programmer can be used as an independent timer that
allows you to count down time without using the oven. In this case, the
“minute minder” display takes priority over the clock display.
• Press the time touch button three times.
• The “minute minder” symbol and “0m00” flash.
• Set the time using the knob.
• Press the knob to confirm.
The display stops flashing after a few seconds and the “minute minder”
starts to run, counting down the time in seconds. Once the time is up,
the minute minder emits a series of beeps to let you know.
The beeps can be stopped by pressing any touch button.
Note:
You can modify or cancel at any time the “minute minder” by pressing
the time button and by reducing the time to 0h00.
Locking the controls (child safety)
You have the option of preventing access to the oven controls by taking
the following steps:
• when the oven is off, press the ‘STOP’ and ‘time’ buttons
simultaneously for a few seconds.
A “padlock” will then be displayed in the screen
• Access to the oven controls is blocked.
To unlock them, simultaneously press the ‘STOP’ and ‘time’ buttons for
a few seconds. The oven controls are once again accessible.
The “standby mode” function
Your oven is equipped with a standby function
The display shows the time of day.
After 4 minutes with no action by the user, the oven display switches
over to standby mode.
No key can be activated.
To reactivate the display, use the ‘function’ selector.
The oven display is once again operational and you can start cooking
again.
To Next Page
Loading...
Need help?
General
