EN 12
USING YOUR APPLIANCE
Adjusting the display contrast
Set the time to 0h10 (see “Resetting the time”)
• Press the ‘W’ button until “CO” is displayed.
• Adjust the contrast, using the knob.
• Press the knob to confirm.
Demo mode
Set the time to 0h00 (see “Resetting the time”)
• Press the ‘W’, ‘minute minder’ and ‘STOP’ buttons simultaneously
for 10 seconds until “DEMO” appears in the display.
• To return to normal mode, set the time to “00:00” and press the
‘W’, ‘minute minder’ and ‘STOP’ buttons again until “DEMO”
disappears from the display
Note:
When the oven is in “DEMO” mode the heating elements are inactive.
Stopping and starting the turntable
If you think that there is insufficient space for the turntable to rotate
freely in the oven, you can stop it before or during the programme.
Stopping the turntable
• To stop the turntable rotating, press and hold the knob.
The “Shelf /Stop turntable symbol” symbol appears in the display.
Restarting the turntable
• Once again, press and hold the knob until the “Shelf /Stop turntable
symbol” disappears from the display.
-
+
To Next Page
Loading...
