EN 22
Building-in
• The appliance can be installed under a worktop or in a wall unit
(open or closed) with the appropriate dimensions for recessed
installation (see building-in dimensions).
• Do not use your appliance immediately (wait approximately 1 to
2 hours) after moving it from a cold location to a hot location, as
the condensation may cause a malfunction.
• Centre the oven in the unit so as to ensure a minimum distance of
10 mm between the appliance and the surrounding unit.
• The material of the unit supporting the appliance must be heat
resistant (or covered with a heat-resistant material).
• For greater stability, attach the oven to the unit with 2 screws
through the holes provided on the side panels.
INSTALLATION
10
50
20
50
min. 550
min. 550
To Next Page
Loading...
