Atag One Zone User Manual

Connection to the phone app
Open the app, login with the previously created account
and follow the guided procedure. The app for iOS will
proceed with the Apple HomeKit connection procedure
and then automatically return to the app.
The product is correctly connected to the internet
and registered when:
Push to conf irm
The app displays a message confirming that the
product has been successfully registered;
The connection to the router and internet is
successfully displayed on the ATAG ONE
Zone
The “ ” icon appears permanently on
the ATAG ONE
Zone
screen
You can now control your ATAG ONE
Zone
system remotely using
the smartphone app or via the web portal my.atag.zone
my.atag.zone
The iOS operating system will automatically
suggest the next steps required to connect
the product to the internet.
Open the ATAG zone app, without logging
in, and follow the guided procedure.
WARNING! After confirming the procedure, your device (smartphone, PC, tablet ...)
will automatically disconnect from the Remote GW Thermo network; an error page
may appear in the browser window that can be ignored.
!
13

Atag One Zone Specifications

General

Type	Smart Thermostat
Connectivity	Wi-Fi
Remote Access	Yes, via App
Weather Compensation	Yes
OpenTherm Support	Yes
Control	Touchscreen