Troubleshooting connectivity issues
If the configuration is not successful, ATAG ONE
Zone
will display the “ ” icon.
(Note: the network configuration must be repeated every time you make
a change to the internet network in your home (change of password,
operator, router)).
Check your WiFi signal is suciently strong at the location
of your ATAG ONE
Zone
1
Ensure your phone is connected to the WiFi router
2
Reset your WiFi router following your providers instructions
3
Repeat the configuration steps above
4
If the configuration is not successful,
take the following steps:
If these steps do not resolve the issue, more in-depth
troubleshooting advice can be found online
Visit: www.atagheating.co.uk/zone
14
To Next Page
Loading...
