ATAGO VISCO-895 User Manual

Quick Manual (using L Beaker as an example)
6. Sample Preparation (
C
p.15)
① Pour the sample in the beaker.
N Reference lines may not be present on
some beakers.
7. Beaker Setup (
C
p.16)
① Attach the beaker to the stand.
② Place the main unit on the stand.
③ Check that the surface of the
sample is level with the spindle's
reference line.
8. Settings (
C
p.17)
① Set the spindle/beaker type and
speed.
N For your convenience,
"Auto Stop" (Cp.25)
"User Scale" (Cp.27) ,and
"Moving Average" (Cp.33)
functions are available.
9. Measurement (
C
p.18)
① Select "Start" to begin
measurement.
Measurement values will be
displayed.
② Select "Quit" to terminate
measurement.
N Cleaning (Cp.24)
N Basic Settings (Cp.31)
Reference line

Spindle name
Reference line (solid line)
For normal measurement use
20.0° C
-- A1L 200.0rpm
558.2 mPas
67.4%
Quit
Torque % bar
Torque %
20.0° C
-- A1L 100.0rpm
0.0 mPas
Max: 1,657mPas
Start
20.0° C
-- A1L 100.0rpm
0.0 mPas
Max: 1,657mPas
Start
Speed setting
Spindle/beaker
setting
Viscosity
Max viscosity
value

ATAGO VISCO-895 Specifications

General

Brand	ATAGO
Model	VISCO-895
Category	Measuring Instruments
Language	English