AT&T 1739 - Store number; Accept blocked calls; Message window

Operation

Store number
Whenthisfeatureison,thesystemwill
announcethecaller’snumberbeforeplaying
backamessage.
Accept blocked calls
Whenthisfeatureisturnedoff,thesystem
willrespondtoblockedcalls(fromcallers
whohavechosentoblocktheirnumbers
fromidentification)withthepre-recorded
announcement,“We’re sorry, blocked calls to
this number cannot be accepted.”Thesystem
thenhangsupwithoutrecordinganyincoming
messages.Whenthisfeatureisturnedon,itwill
answerandrecordmessagesfromanycaller.
Message window
Themessagewindowdisplaysthetotalnumber
ofmessagesrecorded.Iftherearemorethan
ninemessagesrecorded,themessagewindow
displaysthefirstdigit,seconddigitanddash
alternatively.Ifthemessagewindowdisplays
F,thenthememoryisfullandsomemessages
mustbedeletedbeforenewmessagescanbe
recorded.
New message indicator
TheON/OFFlightblinkswhentherearenew
messages.
Listen to incoming messages
Whenthesystemplaysincomingmessages,the
messagewindowdisplaysthenumberofthe
messageplaying.Beforeplayingeachmessage,
thesystemannouncesthedayandtimethe
messagewasreceived.Iftheclockwasn’tset
whenthemessagewasrecorded,ortherewas
apowerfailureafteritwasset,thesytemwill
announce“Power failure”afterthetimeand
day.Afterplayingthelastmessage,thesystem
announces“End of messages.”Ifyouwantthe
systemtoansweracallwhenyouareplaying
message,pressPLAY/STOPtoendmessage
playback.
Play messages—PressPLAY/STOP.Ifthere
arenewmessages,theywillbeplayed.Ifthere
arenonewmessages,theoldmessageswill
beplayed.Iftherearenomessagesinmemory,
thesystemannounces“No messages.”
Play message at half speed—Pressandhold
MEMO/REPEATwhilethemessageisplaying.
Play message twice as fast—Pressandhold
ANNC/SKIPwhilethemessageisplaying.
Repeat entire message—PressMEMO/
REPEAT.
Repeat previous message—PressMEMO/
REPEATtwice,continuethisprocesstolistento
otherpreviousmessages.
Skip to next message—PressANNC/SKIP.
Stop message playback—PressPLAY/STOP.
Save messages
Thesystemautomaticallysavesallincoming
messagesifyoudonotdeletethem.The
systemcansaveapproximately40minutes
ofmessages,includingtheoutgoing
announcement,foratotalofupto99
messages.Whenthememoryisfull,some
messagesmustbedeletedbeforenew
messagescanberecorded.
Memory monitor
Todeterminethesystem’sremainingrecording
time:
1. Ifthesystemison,pressON/OFFtoturn
thesystemoff.
2. PressON/OFFagaintoturnthesystem
on.Thesystemannouncestheremaining
recordingtimeinminutes.(Iflessthanfive
minutesremain,thesystemannounces“The
machine is on. Less than five minutes to
record.”)