Need help?Do you have a question about the AT&T 1792 and is the answer not in the manual?
General| Brand | AT&T |
|---|---|
| Model | 1792 |
| Category | Answering Machine |
| Language | English |
Describes the unit's voice mail capabilities, including personal and announcement-only boxes.
Details the digital memory capacity and expansion options for message storage.
Explains the unit's role as an electronic receptionist, routing calls and providing advanced functions.
Explains how to connect the unit to one or two incoming telephone lines via wall jacks.
Details the process for connecting two separate single-line telephones to the unit.
Explains how to connect a single two-line telephone to the unit.
Explains how to configure the number of rings before the unit answers, including toll saver mode.
Step-by-step guide to set the current time and date on the answering system.
Instructions on how to increase or decrease the speaker volume using arrow buttons.
Details how to enable or disable playback of message options using a slide switch.
Step-by-step process to turn on specific mailboxes or announcement boxes.
Instructions for turning off mailboxes, which also erases greetings and messages.
Provides example greetings and announcements for different mailboxes and functions.
Instructions for listening to the current main greeting.
Explains how to record and attach a temporary message to the main greeting.
Guides on recording a custom main greeting for one or both lines.
Instructions for replacing default voice prompts with custom recordings.
Explains the process of selecting a specific mailbox to access its functions.
Step-by-step guide to record custom greetings or announcements for mailboxes.
Instructions for enabling, modifying, or setting new security codes for mailboxes.
Procedure to disable the security code for local mailbox access.
Steps to reset security codes to default if forgotten, which erases messages.
Explains how to record and leave a short message (memo) in an active mailbox.
Instructions for recording memos that are delivered at a specified time and date.
Explains how to automatically transfer incoming calls to another telephone number.
Diagram showing the flow of calls with call forwarding and notification features active.
Describes how to use pauses and special characters when programming numbers for features.
Guides on setting up the unit to notify a pager service for incoming calls.
Explains how to program a number to receive alerts for urgent messages.
How to set the maximum duration for callers to leave messages.
Details the feature that prompts callers to state their name before selecting a mailbox.
Instructions for enabling and disabling the Do Not Disturb mode, which answers calls after one ring.
How to check the remaining digital memory and understand low memory indicators.
Procedure for turning the answering system on or off without disconnecting AC power.
Step-by-step process to listen to new and old messages directly from the unit.
Instructions for accessing messages by calling the unit from an external phone.
Illustrates the structure and flow for accessing programming functions remotely.
Includes Pound Key Disconnect, Speaker function, and returning callers to the Main Greeting.
Explains how to use the 2-Way/Memo function to record phone conversations.
Procedure for dialing numbers without lifting the telephone handset.
Instructions for automatically redialing the last number called.
Guides on setting up, changing, and using speed dial numbers.
Configuration options for the time interval between auto redial attempts.
Instructions for choosing which line to use for various dialing functions.
To Next Page
