TELEPHONE FEATURE SETUP
NOTE: This section directs you through setting
up telephone features only. To set up and use the
answering system, see ANSWERING SYSTEM
OPERATION AT THE BASE beginning on page 41.
Feature Setup Menu
NOTE: When you follow the directions to “Clear
Message Waiting” or “Set Dial Method” you change
settings for ALL registered handsets. All other
features must be set separately at each handset.
(See “About Adding Handsets on page 2 for details
about additional handsets.)
Press S to enter the Feature Setup menu. Use +
or - to choose features, then press S to save your
choice.
Press C at any time to return to the previous menu
item. Press C repeatedly to exit feature setup and
return to the idle screen.
NOTE: If you wait more than 30 seconds
without pressing a key, the handset returns to the
idle screen.
NOTE: If you receive an incoming call while in
feature setup, the phone automatically exits the
menu to take the call.
7
❖
❖❖
❖❖
❙
❙❙
❙❙
◗
◗◗
◗◗
M
MM
MM
TELEPHONE FEATURE SETUP
TELEPHONE FEATURE SETUP
To Next Page
Loading...
