AT&T 2325 - Replacing the Handset Battery Pack

Replace the Handset Battery Pack
1 Install the handset battery.
Use only AT&T Battery 3301, SKU# 91076.
2 Charge the handset battery.
• Place the handset in the base.
• Charge the battery for at least 12 hours. After the
first charge, the battery will charge in eight hours.
53
b) Plug the battery pack
connector into handset.
Place the battery pack and
wires in the compartment.
a) Remove battery
compartment cover by
pressing on indentation
and sliding downward.
c) Replace cover by
sliding it on its
track up over bat-
tery case until it
snaps firmly into
place.
BATTERIES
BATTERIES