EasyManua.ls Logo

AT&T 2325 - Answering System Troubleshooting

AT&T 2325
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CALLER ID
PROBLEM SOLUTION
If the caller’s name or You should call your service provider to
phone number is not confirm that you subscribe to combined
displayed during Caller ID with Call Waiting service.
Call Waiting:
• Caller ID information received during
Call Waiting is displayed only on the
handset that is in use. The information
is stored in the Caller ID log on ALL
registered handsets.
• Make sure the battery is charged.
ANSWERING SYSTEM
PROBLEM SOLUTION
If messages are • If a caller leaves a very long message,
incomplete: part of it may be lost when the system
disconnects the call after three minutes.
• If the caller pauses for more than seven
seconds, the system stops recording and
disconnects the call.
• If the system’s memory becomes full
during a message, the system stops
recording and disconnects the call.
PROBLEM SOLUTION
If you have difficulty Check the volume setting.
hearing messages:
PROBLEM SOLUTION
If callers are unable to Re-record your outgoing announcement
leave messages in leaving several seconds of blank time at
Mailbox 2 or 3: the end of your announcement to allow
callers enough time to select a mailbox.
57
IN CASE OF DIFFICULTY
IN CASE OF DIFFICULTY

Table of Contents

Related product manuals