AT&T 2325 - Ring Pattern Selection

Ring Pattern
The external ring pattern sets which ringer you hear
when you have an outside call. The internal ring
pattern sets which ringer you hear when you have
an intercom call from another registered handset (if
installed). External ring pattern default setting is 0;
internal ring pattern default setting is 1.
1 Press S. The screen displays
2 Press + to - until the screen displays
3 Press S. The screen displays
4 Press - or + then S to choose EXTERNAL
or INTERNAL.
5 Use the keypad to enter a ring pattern
selection (0 – 9)
— OR —
Press - or + to display desired setting.
A sample of the displayed setting is played
briefly.
6 Press S to save displayed setting. You will
hear a confirmation tone.
7 Press C to exit ring pattern setup.
>EXTERNAL
INTERNAL
>RING PATTERN
KEY CLICK
>CALL LOG
PHONE BOOK
9
❙
❙❙
❙❙
❖
❖❖
❖❖
M
MM
MM
◗
◗◗
◗◗
TELEPHONE FEATURE SETUP
TELEPHONE FEATURE SETUP