AT&T 2325 - INTERCOM OPERATION; Making Intercom Calls

INTERCOM OPERATION

NOTE: The features in this section work only
if you have installed additional AT&T 2300
Expansion Handsets (purchased separately)
with your AT&T 2325 Telephone or if you have
purchased the AT&T 2365 Cordless Telephone.
(See “About Adding Handsets” on page 2 for
more information.)
Intercom Calls
If you have more than one handset (AT&T 2300,
purchased separately) registered with your 2325 base
or if you have the 2365, you can make intercom calls
between handsets.
1 Call one handset from another by pressing
I.
2 Use + or - to scroll through the list of
registered handsets.
3 Press S when the desired handset is
highlighted.
4 To answer, press P on the second handset.
Call All
You can send an intercom call signal to all registered
handsets at once. The first handset to answer the call
will be connected.
1 Press I on the handset
2Use + or - to highlight CALL ALL.
3 Press S.
4 To answer, press P at another handset.
Only the first handset to respond will be
connected to the intercom call.
23
❚
❚❚
❚❚
❖
❖❖
❖❖
INTERCOM OPERATION
INTERCOM OPERATION