51
REMOTE ACCESS COMMANDS
FUNCTION: COMMAND:
Record announcement Press *7; after beep, record
announcement, press # 5 to stop. System
plays back announcement.
Record memo Press *8, then the mailbox number
where you want memo recorded; speak
after the system announces “Now
recording;”press #5to exit.
End remote access call Press *0.
Turn system off Press #0; the system announces,
“Machine off.” Press #0again to turn
the system back on.
Turn system on When system is off, it answers after 10
rings and announces,“Please enter your
remote access code.” Press #, then enter
your remote access code.
NOTE: The remote access call automatically ends if you don’t
press a key within 20 seconds (other than when recording or
playing messages or announcements).
REMOTE ACCESS
REMOTE ACCESS
To Next Page
Loading...
