16
TELEPHONE OPERATION
AT THE BASE
Switch Between Lines
You can alternate between calls on Line 1 and Line 2 as often as necessary.
1 Make or answer a call.
2 Press to place the first call on hold.
3 Press the LINE button for the second call. Then lift the base
handset or press
K or h to answer or place the
second call.
4 To return to the first call, press to place the current
call on hold
— OR —
Replace the base handset in the cradle, or press K or
h to end the current call.
Then press the LINE button for the first call and lift the base
handset or press K or h.
Note: If you switch lines without placing the current call on hold,
you will drop the current call.
Conference Calls
You can use both lines at the same time to set up a three-party call.
1 Make or answer a call.
2 Press to place the call on hold.
3 Make a call on the other line.
4 When the call is answered, press .
The conference call begins immediately.
5 To end a conference call, hang up. All parties will be
disconnected.
To drop one line:
1 Press . Then use and to select
the line you wish to drop.
2 Press . The selected line will be disconnected.
To place a conference call on hold:
Press to place both parties on hold. Lift the base handset or press
K or h to return to the conference call.
HOLD
OK
DROP
CONF
HOLD
HOLD
HOLD
To Next Page
Loading...
