39
Spare Battery
This phone is equipped with a built-in spare battery charger in the base
unit. The spare battery charger allows you to always have a charged
battery available should the handset battery charge become low.
A fully charged spare battery installed in the charger also provides back-up
power in the event of a power failure (see “Power Fail Operation” for
details).
NOTE: Do not switch the battery while on a call.
1 Press the release button on the left side of the base unit to open
the spare battery compartment drawer.
2 Place the battery pack (AT&T Accessory Battery Model 2401,
SKU# 91077, purchased separately) in the drawer, with the
charge contacts facing up and toward the phone.
3 Push the drawer closed.
4 The spare battery takes 24 hours to fully charge.
BATTERIES
Spare battery
Spare battery
compartment
drawer
Spare battery
compartment
release button
2462_00_1 ATT CIB 1/28 1/28/02 9:52 AM Page 39
To Next Page
Loading...
