AT&T 2462 - Page 49

PERF.
Remote Command Press Voice Help menu 5 Play all messages 1, then mailbox number Play only new messages 2, then mailbox number Repeat message 4 while messages plays Skip message 6 while messages plays Stop # Save messages Hang up Delete current message 3 while message plays Delete all messages 3, then mailbox number.
After prompt press 3 again.
Review announcement 7, then mailbox number Record announcement 8, then mailbox number,
speak after beep, press 5 to stop
End remote access call *0 Turn system off 0, and the mailbox number; system
announces, “The ITAD is now off”. Press 0 again to turn system back on
Turn system on When off, system answers after 10
rings and announces, “Please enter your security code”; press #, then enter your security code
Change Answer Mode 9, then mailbox number, after
announcement press 9 again to change mode.
Remote Command Press Voice Help menu 5 Play all messages 1, then mailbox number Play only new messages 2, then mailbox number Repeat message 4 while messages plays Skip message 6 while messages plays Stop # Save messages Hang up Delete current message 3 while message plays Delete all messages 3, then mailbox number.
After prompt press 3 again.
Review announcement 7, then mailbox number Record announcement 8, then mailbox number,
speak after beep, press 5 to stop
End remote access call *0 Turn system off 0, and the mailbox number; system
announces, “The ITAD is now off”. Press 0 again to turn system back on
Turn system on When off, system answers after 10
rings and announces, “Please enter your security code”; press #, then enter your security code
Change Answer Mode 9, then mailbox number, after
announcement press 9 again to change mode.
2462_00_1 ATT CIB 1/28 1/28/02 9:52 AM Page 46