AT&T 610 - Unpack and Install; Unpacking

User .... s Guide
Au.guK 1985
1.
Unpack and Install
Unpack and Install
Page 1- 1
Overview
This sec tion provides information for unpacking and
installing the 610 Business Communications Terminal (BCT).
There is also a brief checkout procedure included in this
section.
Unpacldng
Observe any and all "Caution" and ''Warning'' labels on the
cartons.
Follow these procedures when unpacking:
• Before unpacking, confirm order with unit codes marked
on the carton.
• Read the "Unpacking and Installing" instructions.
• Select an area to unpack the carton so that damage to
the components will not occur.
• As a safety precaution, wear approved safety glasses or
goggles when unpacking and assembling terminal.
• Unpack each carton carefully. Use a anall blade to cut
all sealing tape.
Each of the following will be shipped in a separate carton:
• Monitor
• Controller/Base
• Keyboard
• Modem Cable (if present)
Keyboard
Controller/Base
Monitor
Pfgure 1-1. Shipping CartoDs
Modem
Cable