AT&T 610 - Function Keys F9 through F14 - 98-Key Keyboard (56 K420;ADA); Function Keys F9 through F14 - 98-Key Keyboard (56 K420;ADA) Only

User .... s Guide
August 1985
I/O Fltey Root
Depression of the I/O Fkey root key (with the Control key
depressed) will display those labels associated with an optional
Expansion I/O card (if present). The particular labels will
depend on which Expansion I/O card is present; if no card is
present, then no action will occur.
Sys ftey Root
Depression of the Sys Fkey root key (with the Control key
depressed) will display the Sys Fkey labels.
Fl
through
F8
Depressing one of the "F" keys while the Sys Fkey
labels are displayed will cause its System
function key string to be transmitted. These
strings and labels can only be downloaded from
the line. The System strings may never be
viewed on a SET UP screen. They are a maximum of
eight characters long.
Function Keys F9 through F14 -- 98-Key Keyboard (56K420/ADA)
Figure 4-12. Function Keys F9 through F14 -- 98-Key Keyboard
(56K420/ADA) Only
The boldly outlined keys of Figure 4-12 when depressed,
will transmit the escape sequences shown in Table 4-F. The se-
quences will be displayed if data is sent to the display (local
or remote echo) and the Monitor Mode option is on (refer to
Section 5).
Keyboard
Page 4-19