AT&T 610 - Brief Test

User .... s Guide
August 1985
Unpack and Install
Page 1- 9
Brief Test
14. Depress ON side of power switch. The terminal displays a
"610 OK" message after the controller self-test is passed.
If the test fails, a failure message will be displayed.
15. Depress both SHIFT keys and a CTRL key (left control key
103 key keyboard (56K430 / ACZ» simultaneously. If the
internal tests have passed, the keyboard alarm sounds
indicating the keyboard has passed the self-test.
16. Check display:
• Cursor is at fir st column of first line. The cursor is
an inver se video rec tangle or underline (it may be
blinking).
• Eight User Fkey label areas appear at the bottom of the
screen if the Labels Option is on (refer to Section 5).
o
Figure 1-10. Screen Layout
17. Depress the Set-Up root key (with Control (Ctrl) key
depressed) and set the terminal options. For a complete
description of the options available and procedures for
selection, refer to Section 5.
The terminal is now basically functional and ready for use.
If trouble 1s encountered, refer to Section 10.