AT&T 610 - Page 49

User .... s Guide
August 1985
SAVED
VALUES
SAVE
NEXT
SETUP
Depressing this key restores the options to their
previously saved values.
Depressing this key causes the currently
displayed values for the options to be stored in
memory.
Depressing this key brings up the User Fkey SET
UP screen and labels. Each Fkey and its current
label will be displayed. The User Fkey screen
labels are shown below:
~'g 11'-- __ ---'
PREVIOUS
FIELD
and
NEXT
FIELD
DEFAULT
VALUES
NEXT
SETUP
CLEAR
TO END
These two keys are used to move the cursor
backward and forward through the User Fkey label
and string fields in the User Fkey SET UP mode.
Depressing this key will cause the default values
for the User Fkey labels and strings to be
displayed.
Depressing this key brings up the optional
Expansion I/O card set up screen (if present and
using the options screen); otherwise, depressing
this key will bring up the Options SET UP screen.
Depressing this key in the Options SET UP mode
will clear the Enter key string option from the
cursor to the end of the string; depressing this
key in the User Fkey SET UP mode will clear the
field (label or string) from the cursor position
to the end of the field. In the Options SET UP
mode, this key is operable in the string area
only.
Depression of. DEFAULT VALUES, SAVED VALUES, or SAVE
screen-labeled keys will cause the message "DONE" to be written
at the bottom left corner of the Options screen. The USER Fkey
SET UP mode is exited and the Fkey strings and labels are stored
when the Set-Up key is depressed (with the Ctrl key depressed)
or the screen-labeled NEXT SET UP key is depressed. "DONE" will
be erased when any key except Shift, Control, Caps Lock, or Num
Lock is depressed.
Keyhoard
Page 4-17