AT&T 610 - Setting Function Keys (F1-F8) On-Line

Operations
Page 6- 8
SettiDg' FQIlction J.Ceys (FI-F8) On-Line
USer .... s Guide
August 1985
The Use r Fkey, I/O Fkey, and Sys Fkey keys can be downloaded
by the host using the escape sequence ESC[ps1jpnjps2;psJ q
label+string where:
psI = Fkey key to be downloaded (1 through 8)
pn = number of characters in the string (up to 35
for User Fkey and 8 for Sys Fkey). If pn =
0, only the labels are downloaded without
changing the strings.
ps2= ignored
ps3 = 0 if Sys Fkey, 1 if User Fkey, or 2 if I/O
Fkey (if an I/O card is used refer to the
I/O card User"'s Guide for_ sequence
implemen tation).
label+string = a 16 charac ter label (must by 16) followed
immediately by the string of characters as
nefi""'" by the pn in the escape sequence.
Exa.ple: ESC [1; 7; 0; lq spSCROLLspspREGIONspESC [5 ;20r
Rote: "sp" is space character.
This sequence will write a label of SCROLL REGION for User
Fkey key 1 and load a string to make lines 5 through 20 the
scrolling region.
The sequence ESC [lq will be interpreted as a download
sequence. The next sixteen characters will be the screen label
for Sy s Fkey 1.
All strings stored in the User Fkey keys and labels will be
saved whether they are programmed locally or are downloaded.
Printer Operations
This terminal is capable of supporting an auxiliary
printer. The interface leads for the aux~ry port are defined
in Section 9. The printer speed must match the line speed.