25
Telephone operation
Feature setup
Turn NEW CALL light off
If a NEW CALL light continues to flash when there are
no messages on that line, you may have received a false
signal from your telephone company. You can turn off the
light manually.
Press ENTER to begin feature setup.
Press until the screen displays VOICE MESSAGE.
Press ENTER. The screen displays L1 COVM ON/OFF.
Press until the screen displays L1 LIGHT OFF.
Press ENTER to turn the light off for that line. The
screen displays L2 LIGHT OFF.
Repeat Step 5 to turn the light off for the other line.
— OR —
Press and hold ENTER to return to the idle screen.
NOTES:
This feature only turns off a NEW CALL light; it does not delete the
voicemail message(s). Use this feature when the telephone indicates
there is voicemail when you have none, or you have accessed your
voicemail from a different telephone line (while away from home).
If there actually is a new voicemail message, your local telephone
company will continue to send the signal which makes a NEW CALL
light flash.
The telephone company voicemail may alert you to new messages
with a stutter (broken) dial tone. Contact your telephone company for
more details.
1.
2.
3.
4.
5.
6.
1.
2.
VOICE MESSAGES
L1 LIGHT OFF
VOICE MESSAGES
L2 LIGHT OFF
To Next Page
Loading...
Need help?
General
