AT&T A50 - Battery Charging and Connecting to A50

8
ChargingtheBattery
Before using your mobile hotspot, ensure that the battery is fully charged. Be sure to use the
charger that came with your device.
NOTE: Your A50 is equipped with a replaceable rechargeable battery. When handling the battery
or SIM card, please make sure the device is not connected to any power sources. Do not use any
tools, sharp objects or any utensils when dealing with the battery. Doing so may cause damage
that voids your warranty.
 It normally takes 3~5 hours, depending on your power sources and device status to fully
charge the battery.
 The battery discharges faster as more devices connect to your mobile hotspot.
 Battery life depends on the network, signal strength, temperature, features, and active
connection time.
 When charging, keep your device near room temperature.
 Never leave the A50 in an unattended vehicle due to uncontrolled temperatures that may
be outside the desired temperatures for your device.
 It is normal for batteries to gradually wear down and require longer charging time.

ConnectingtoYourA50
Wi‐FiName(SSID)andPassword
Main and Guest Wi-Fi Names and Passwords display on the device main screen.
ConnectingtotheInternet
1 Open the Wi-Fi application or controls on your laptop or Wi-Fi capable device that you want
to connect to your A50. Then find your A50’s Wi-Fi name.
2 Click Connect and enter the Password when prompted.