AT&T A50 - Post-Setup Usage and Software Updates

9
UsingYourA50afterSetupisComplete
MobileHotspottoshareconnections
Your A50 is a wireless mobile hotspot creating Wi-Fi local networks that allow up to 20 Wi-Fi
connections to the Wi-Fi capable devices around it.
Wi‐FiandWebAdminPageSecurity
Your A50 comes from the factory with security turned on. The default Web Admin home page
password is ‘admin’.
You can create your own Web Admin home page password by signing in the Web Admin
home page. After you create your own Web Admin home password, you will be required to use
the new password to sign in the Web Admin home page.
NOTE: When you sign in the Web Admin home page for the first time using the default password
‘admin’, it will guide you to change the password immediately.
To change your Web Admin home page password:
1 Connect your Wi-Fi capable device to your A50.
2 Open an internet browser and open page http://mobile.hotspot
3 Click Settings > Device > Web Interface.
UpdatingYourA50software
New software is updated automatically in the following scenarios.
1) When a new update is available, your device will download it in the background and wait
to be applied on the next power off. When you power off the device, it will be updated
automatically before it goes off.
2) The device must have at least 20% battery to apply an update.
3) If the device continues powered on, it will apply the update between the hours of 2-4am
next day automatically and restarts.