AT&T alcatel AXEL 50004R - Getting connected; Connecting to the Internet; Cellular network; Wi-Fi

42
43
To add a Wi-Fi network
When Wi-Fi is on, you may add new Wi-Fi networks according
to your preference.
• Swipe up on the home screen, tap Settings > Network &
internet > Wi-Fi > Add network.
• Enter the network SSID and required network information.
• Tap SAVE.
When successfully connected, your device will be connected
automatically the next time you are within range of this
network.
To forget a Wi-Fi network
Prevent automatic connections to networks which you no
longer wish to use.
• Turn on Wi-Fi, if it’s not already on.
• In the Wi-Fi screen, press and hold the name of the saved
network.
• Tap Forget in the dialog box that opens.
7.2 Connecting with Bluetooth
*
.................
To turn on Bluetooth
To exchange data or connect with a Bluetooth device, you
need to enable Bluetooth and pair your phone with the
preferred device.
1. Swipe up on the home screen, tap Settings > Connected
devices > Connection preferences > Bluetooth.
2. Tap to enable Bluetooth. Your device and Pair new
device will show on the screen once your Bluetooth is
activated.
3. To make your phone more recognizable, tap Device name to
change your device name.
*
You are recommended to use Bluetooth devices and accessories
tested and proved compatible with your phone.
To exchange data/connect with a device
To exchange data with another device
1. Swipe up on the home screen, tap Settings > Connected
devices > Connection preferences > Bluetooth.
2. Tap to enable Bluetooth. Your device and Pair new
device will show on the screen once your Bluetooth is
activated.
3. Tap on the name of the device to initiate pairing. Tap Pair
to confirm.
4. If the pairing is successful, your phone will connect to the
device.
To disconnect/unpair from a device
1. Tap after the device name you want to upair.
2. Tap FORGET to confirm.
7.3 Connecting to a computer .....................
With a USB cable, you can transfer media files and other files
between microSD card/internal storage and computer.
To connect/disconnect your device to/from the computer:
• Use the USB cable that came with your device to connect
the device to a USB port on your computer. You will receive
a notification that the USB is connected.
• When transfer is complete, use the eject action on your
computer to disconnect your device.