Smart call blocker
54
Call block settings
Star name list
There are many organizations like schools, medical offices,
and pharmacies that use robocalls to communicate important
information to you. Robocall uses an autodialer to deliver pre-
recorded messages. By entering the name of the organizations
into the star name list, it ensures these calls will ring through
when you only know the caller names but not their numbers.
If the first 15 characters of the incoming caller ID’s name match
a name saved in your star name list, the call will get through and
ring. The star name list stores up to 10 names.
Add a star name entry:
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the handset
is not in use. Press qCID or pDIR to scroll to Smart call blk, then
press MENU/SELECT.
2. Press qCID or pDIR to scroll to Star name list, and then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to Add new entry, then press
MENU/SELECT.
4. When the screen displays Enter name, use the dialing keys to
enter a name (up to 15 characters). Press a key repeatedly until
the desired character appears. The rst character of every word
is capitalized.
f Press qCID or pDIR to move the cursor to the le or right.
f Press 0 to add a space.
f Press MUTE/DELETE to erase a character.
f Press and hold MUTE/DELETE to erase all characters.
f Press TONE to change the next letter to upper or lower
case.
5. Press MENU/SELECT to store your star name entry. The display
shows Name repeated if the name is already in the star name
list. You cannot save the same name twice.
To Next Page
Loading...
Need help?
General
