Answering system
69
Answering system settings
4. The screen displays Play [2] Del [3] Rec [7] and it announces, “To
play, press 2. To record, press 7.” Press 3 to delete your recorded
announcement. The handset displays Annc deleted and
announces, “Announcement deleted.”
When your announcement is reset, the system answers calls with
the default announcement, as described above. You cannot delete
the default announcement.
Answer on/o
By default, the answering system is on and ready to record
messages. You can turn the answering system o, but if you do so,
the answering system does not answer calls and record messages.
To turn the answering system on or o:
Using a cordless handset:
1. When the handset is in idle mode, press MENU/SELECT to enter the
main menu.
2. Press qCID or pDIR to scroll to Answering sys, then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to Answer on/off, then press
MENU/SELECT.
4. Press qCID or pDIR to choose On or Off, then press
MENU/SELECT to save the setting. You hear a confirmation tone.
When the answering system is on, the handset shows ANS ON.
Using the telephone base:
Press /ANSWER ON to turn the
answering system on or o. If the
answering system is turned on, it
announces, “Calls will be answered.” If
the answering system is turned o, it
announces, “Calls will not be answered.”
To Next Page
Loading...
Need help?
General
