80
Adding and registering handsets/headsets
Your telephone can support up to ve DECT 6.0 cordless handsets
or headsets. You can purchase additional handsets (AT&T model
BL102-0, sold separately) or up to three cordless handsets and two
cordless headsets (sold separately). Visit
www.telephones.att.com/accessories for a list of compatible
DECT 6.0 cordless headsets. Each new handset or headset must be
registered to the telephone base before use. You must register each
handset or headset separately.
To register a cordless headset to this telephone system, please
refer to the corresponding user’s manual for details. To register a
cordless handset, see below.
The handsets provided within your product box are already
registered as HANDSET 1, and so forth. Additional handsets are
assigned numbers in the sequential order they are registered (up to
HANDSET 5).
Register a handset to the telephone base
1. Before you begin registration, make sure the handset is out of
the telephone base or charger and shows To register HS... and
... see manual.
2. Put the handset you wish to register on the telephone base
cradle.
3. The handset shows Registering... and the IN USE light on the
telephone base turns on. If the registration is successful, the
handset screen displays Registered and beeps. The handset is
now registered with the telephone base.
Appendix
To Next Page
Loading...
Need help?
General
