8
The following are some common features you may want to set before this
telephone. Refer to the online user’s manual complete feature instructions.
Set date and time
When the telephone is idle, the screen shows the
date and time. If you subscribe to caller ID service, the
day, month and time are set automatically with each
incoming call. You may also set the date and time
manually.
Press MENU/SELECT. The screen displays
DATE/TIME and USE # FOR AM/PM alternatively.
Use the dialing keys (0-9) to set the blinking digits.
Use # (pound key) to select between AM and PM.
Press MENU/SELECT to save and move on to the
next feature.
Ringer volume
Adjust the RINGER VOL -/+ switch at the right side of the telephone
base to set the ringer volume to off, low, middle or high. When the
ringer is off, appears on the screen.
1.
2.
3.
Telephone settings
Blinking
DATE/TIME
12:00
AM
1/01
USE # FOR AM/PM
12:00
AM
1/01
To Next Page
Loading...
Need help?
General
