7
Menu operation
Use the menu to change the telephone settings.
Press MENU/SELECT repeatedly
until the screen displays the
desired feature.
Press CID or DIR until the
screen displays the desired setting.
Press MENU/SELECT to save your
selection and move to the next
feature. The telephone returns
to idle mode after 15 seconds,
or you can press CANCEL to exit
programming immediately.
Feature summary
Default settings are indicated by * in the following list.
Feature/options Function
DATE/TIME
1/01 12:00 AM
Set the date and time. Use the dialing keys to edit. Use # (pound key) to
select AM or PM.
CONTRAST
1, 2*, 3, 4
Adjust screen brightness to a comfortable level, from 1 (the lightest) to
4 (the darkest).
DIAL MODE
TOUCH TONE*
PULSE
Set the telephone to be tone (touch-tone) or pulse (dial pulse) dialing.
LANGUAGE
ENGLISH*
ESPANOL
FRANCAIS
Set the screen display language.
HOME AREA CODE
HAC- _ _ _
Set your home area code if you dial only seven digits for local calls.
LOCAL AREA CODE
LAC 1- _ _ _
LAC 2- _ _ _
LAC 3- _ _ _
LAC 4- _ _ _
Program up to four local area codes that do not require dialing a 1
before them.
1.
2.
3.
Menu setup
To Next Page
Loading...
Need help?
General
