AT&T CL82219 User Manual

6
Battery
Install the battery, as shown below.
Caution: Use only the supplied rechargeable battery or replacement battery
(model BT183342/BT283342).
Charge your handset(s) before initial use. The battery is fully charged aer 10
hours of continuous charging. The CHARGE light on the top of the handset is on
during charging.
Install
THIS SIDE UP /
CE CÔTÉ VERS LE HAUT
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles
:
B
T
183342/
BT283342 (2.4V 400mA
h Ni-MH)
WARNING
/ AVERTISS
EMENT :
DO
NOT B
URN OR PUNCTURE BATTERIES.
N
E PAS INCINÉRER OU PERCER LES PILES.
Mad
e in Chin
a / Fabriqué en chine CR1349

AT&T CL82219 Specifications

Technical Specifications

RF frequency band	1921.536MHz – 1928.448MHz
Channels	5

Power

Telephone base voltage (AC voltage, 60Hz)	96Vrms – 130Vrms
Telephone base voltage (AC adapter output)	6VDC @ 400mA
Charger voltage (AC adapter output)	6VDC @ 400mA

Battery

Handset battery	2.4V 400mAh, 2xAAA Ni-MH
Talk time (cordless handset)	up to 7 hours
Standby time	up to 5 days