Telephone operation
28
Options while on calls
Blind transfer
While on an outside call, you can transfer the call to a specific handset or
any handset without notifying them.
To transfer an outside call directly without notifying the desired handset:
1. During the call, press MENU/SELECT.
2. Press MENU/SELECT again to choose Transfer.
If you have a two-handset system, the outside call is
put on hold and your handset shows Transferring call...
The other handset rings and shows Transfer from other
handset.
If you have more than two handsets, your screen
shows TRANSFER TO: Use the dialing keys to eenter a
specific handset number (1-9 for handsets 1-9, TONE
followed by 0-2 for handsets 10-12, or TONE followed
by # for all handsets), or press qCID or pDIR to scroll
to the desired handset and press MENU/SELECT. The
outside call is put on hold and your handset screen
shows Transferring call... or Transferring call to all...
The other handset rings and shows Transfer from
HANDSET X (HANDSET represents the handset name, X represents the
handset number).
3. To answer the call on the destination handset, press, press PHONE/FLASH,
/SPEA�ERSPEA�ER, or any dialing key (0-9, TONE or #). The initiating handset
shows Call transferred and goes to idle mode.
NOTES:
To cancel the transfer and return to the external call before the blind transfer call is answered,
press OFF/CANCEL, PHONE/FLASH or /SPEA�ERSPEA�ER on your handset.
If the other handset does not answer the transfer within 30 seconds, the transfer ends and the
initiating handset rings while showing No response to transfer. If it does not pick up within 30
seconds, the handset returns to idle mode and the outside call ends.
•
•
•
•
>Transfer
Intercom
TRANSFER TO:
>Handset 2
Phone 0:00:12
6:30
AM
8/06
To Next Page
Loading...
Need help?
General
