AT&T CL82313 User Manual

Multiple handset use
Intercom
Use the intercom feature for conversations between two handsets. You can
purchase expansion handsets (model AT&T CL80113) for this telephone base
to expand your telephone system (up to 12 handsets).
Using a handset to initiate intercom calls:
1. Press MENU/SELECT in idle mode to enter the main menu.
Press qCID or pDIR to scroll to Intercom, then press
MENU/SELECT.
If you have a two-handset system, the handset shows
Calling other handset.
If you have more than two handsets, the handset shows
INTERCOM TO: Use the dialing keys to eenter a specific
handset number (1-9 for handsets 1-9, TONE followed
by 0-2 for handsets 10-12, or TONE followed by
#
for
all handsets), or press qCID or pDIR to scroll to the
desired handset and press MENU/SELECT. Your handset
screen shows Calling HANDSET X, or
Calling all handsets.
The destination handset(s) rings and shows HANDSET X is
calling or HANDSET X is calling all (HANDSET represents
the handset name, X represents the handset number).
2. To answer the intercom call, press PHONE/FLASH, /SPEA�ERSPEA�ER or any
dialing key (0-9, TONE , or
#
) on the called handset. Both handsets now
show Intercom.
3. To end the intercom call, one party presses OFF/CANCEL, or place the
handset back in the telephone base or charger. The other party hears four The other party hears four
beeps. Both handsets display Intercom ended.
NOTES:
Before the intercom call is answered, you can cancel it by pressing OFF/CANCELCANCEL.
If the called handset does not answer within 100 seconds, or the handset is in use, on a call or
out of range, the initiating handset shows No answer. Try again.
To temporarily silence the intercom ringer, press OFF/CANCEL or MUTE/DELETE.
You can only use one pair of handsets at a time to make intercom calls.
•
•
•
•
•
•
Calling
HANDSET X
HANDSET X
is calling
Intercom
11:35
AM
12/02
30

AT&T CL82313 Specifications

General

Brand	AT&T
Model	CL82313
Category	Telephone
Language	English